/*
 * Copyright (c) 1998,1999 Trans New Technology, Inc. and
 *                         Hiroki NAKANO <cas@trans-nt.com>
 * All rights reserved.
 *
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that this notice is retained,
 * the conditions in the following notices are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by
 *	Trans New Technology, Inc. (in Japan)
 *
 *
 * THIS SOFTWARE IS PROVIDED BY TRANS NEW TECHNOLOGY, INC. ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL TRANS NEW TECHNOLOGY, INC. BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */

/*
 * ICOM UX-136 Wireless LAN Card
 *   (AMD Am79C930 Firmware ver.2.0-Japan)
 *
 *   glue module for FreeBSD PAO
 *
 */

/*
 *  defines for the driver to touch the chip.
 *
 *     pay attention about endian.
 */
#define	_UX_MEM_ADDR(sc,off)		\
	(((struct ux_pcmcia_softc*)(sc))->ux_pcmcia_devi->isahd.id_maddr+(off))

#define	UX_MEM_READ1(sc,off)	(*(volatile u_int8_t *)_UX_MEM_ADDR(sc,off))
#define	UX_MEM_READ2(sc,off)	(*(volatile u_int16_t *)_UX_MEM_ADDR(sc,off))
#define	UX_MEM_READ4(sc,off)	(*(volatile u_int32_t *)_UX_MEM_ADDR(sc,off))
#define	UX_MEM_WRITE1(sc,d,off)		\
			(*(volatile u_int8_t *)_UX_MEM_ADDR(sc,off) = (d))
#define	UX_MEM_WRITE2(sc,d,off)		\
			(*(volatile u_int16_t *)_UX_MEM_ADDR(sc,off) = (d))
#define	UX_MEM_WRITE4(sc,d,off)		\
			(*(volatile u_int32_t *)_UX_MEM_ADDR(sc,off) = (d))

#define UX_MEM_READM(sc,ptr,sz,off)		\
		bcopy(_UX_MEM_ADDR(sc,off), (ptr), (sz))
#define UX_MEM_WRITEM(sc,ptr,sz,off)		\
		bcopy((ptr), _UX_MEM_ADDR(sc,off), (sz))

#define	_UX_IO_ADDR(sc,off)		\
	(((struct ux_pcmcia_softc*)(sc))->ux_pcmcia_devi->isahd.id_iobase+(off))
#define	UX_IO_READ1(sc,off)		inb(_UX_IO_ADDR((sc),(off)))
#define	UX_IO_READ2(sc,off)		inw(_UX_IO_ADDR((sc),(off)))
#define	UX_IO_READ4(sc,off)		inl(_UX_IO_ADDR((sc),(off)))
#define	UX_IO_WRITE1(sc,d,off)		outb(_UX_IO_ADDR((sc),(off)),(d))
#define	UX_IO_WRITE2(sc,d,off)		outw(_UX_IO_ADDR((sc),(off)),(d))
#define	UX_IO_WRITE4(sc,d,off)		outl(_UX_IO_ADDR((sc),(off)),(d))

#define	UX_OFFSETOF(stname,member,base)	\
		((base) + (unsigned int)(&(((struct stname *)0)->member)))
#define	UX_SIZEOF(stname,member)	sizeof(((struct stname *)0)->member)

/*
 *  softc
 */

struct ux_pcmcia_softc {
	struct ux_softc		ux_pcmcia_sc;
	struct pccard_devinfo *	ux_pcmcia_devi;
};

/*
 *  functions am79c930.c uses
 */
void ux_tap(struct ux_softc *sc, struct mbuf *m);

/* EOF */